Hydrotech Precision-PWS 8-M_8-MST OWNERS GUIDE - Manual (Page 17)

COIL SUPPORT TIE
WATER DISTILLER HEAD
Shipping Tie Removal Diagram
4. Refer to Shipping Tie Removal Diagram above. Cut/Remove the coil
support tie located on the top of the water distiller head. Be careful not to
scratch the water distiller when removing. This tie supports the cooling
coil during shipping only.
Water Distiller Installation Tools
TOOLS REQUIRED:
For Water Distiller Installation
(A) 5/8” Open End Wrench
(B) Adjustable Wrench
(A) (B)
OR
17