Hydrotech Precision-PWS 8-M_8-MST OWNERS GUIDE - Manual (Page 18)

Water Distiller Leg Installation
1. Refer to the Water Distiller Leg Installation Diagram shown
below. Place a ½ x 5/16” stainless steel washer on the threads of
each leg and screw the legs into the bottom of the distiller head.
BULKHEAD
WASHER
LEG
POWER CORD
Water Distiller Leg Installation Diagram
Optional Storage Tank Assembly
Sight Tube Assembly
1. Remove the sight gauge from the parts bag and packaging.
3/8" JAM NUT STORAGE TANK
SIGHT GAUGE
VALVE HANDLE
DRAIN VALVE THREADED FAUCET END
GASKET
Sight Gauge Installation Diagram
18