Eplacing, Harcoal in, Harcoal – Hydrotech Precision-PWS 8-M_8-MST OWNERS GUIDE User Manual

Page 30: Ilter, Anister, Sed with

Advertising
background image

Replacing Charcoal in Post Charcoal Filter Canister (Used with
8-M without Optional Storage Tank)



1.

Turn all switches off and allow the water distiller to cool down.

NOTE: Replace charcoal in filter every 2 months or every 500 gallons of
distilled water.

FILTER CAP

FEED TUBE

WATER BOTTLE

POST CHARCOAL

FILTER

BULKHEAD, 3/8"JG

(INSIDE DISTILLER)

TUBE, SS, 3/8" X 1-1/2"

Post Charcoal Filter Charcoal Replacement Diagram

2.

Refer to the Post Charcoal Filter Charcoal Replacement Diagram
above. Remove the feed tube from the filter by pulling it out of the filter.

3.

Over a sink or suitable garbage can, remove the lid of the filter completely
and empty charcoal from canister and rinse.

4.

Fill canister 2/3 full with new charcoal and rinse over a sink or pail with
approximately 2 cups of distilled water until water runs clear.

5.

Press the filter cap back on to the post filter canister.

6.

Insert the feed tube approximately ½” back into the hole on the side of the
filter canister.

7.

Place the filter on the side of any storage container or bottle.

30

Advertising