Clear-Com Production-Maestro-Pro - Manual (Page 21)

Loading <IP addresses of all matrices>
The onscreen display is updated with the new configuration information, and the port entities are no
longer grayed out.
4.3 Opening a project (layout) file
The Production Maestro Pro project file (*.ccr) (also referred to as a layout file), stores the Production
Maestro Pro screen configuration (including such features as palette width, canvas configuration,
audio level meters, settings and palette configurations).
The *.ccr file does not contain:
• The port information as this is read directly from the matrices by Production Maestro
Pro (see 4.1 Connecting to the matrices in an EHX system above).
• The alias level or routing assignments made by Production Maestro Pro.
To open a Production Maestro Pro project file (*.ccr):
1. Click Open [ ] in the toolbar at the top of the screen.
2. A dialog opens. From the dialog, browse to the project file ( *.ccr format). The file format is
pre-selected for the selection field.
3. Open the project file.
Production Maestro Pro loads the layout information.
4.4 Saving a project (layout) file
To save a Production Maestro Pro project file (*.ccr):
1. Click Save [ ] in the toolbar at the top of the screen.
2. A dialog opens. Enter the required filename and save the file to the desired location on your
PC. The Save File Type: is pre-selected as a *.ccr.
The Production Maestro Pro layout and settings information is saved to the file.
Note:
Port information is not saved to the project file, as this information is read from the matrices in
the EHX configuration when opened by Production Maestro Pro.
4.5 Refreshing information from the matrices
To reload the current device information from the connected matrices, click Refresh [ ] in
the toolbar in the top of the screen.
The information displayed by Production Maestro Pro is updated.
Note:
Refresh may be used after communications have been interrupted between the PC and matrices.
21 Eclipse Production Maestro Pro User Guide