Clear-Com Production-Maestro-Pro - Manual (Page 29)

Adding items to the palette
Drag and drop the items you require ( such as panels, four-wires, idents, monitors and keygroups)
from the canvas to the palette. Organize the items by dragging items anywhere on the palette. The
items you add to the palette are those that will be available to you in Assignment mode
(see 4.11.4 Assignment mode).
Note:
The location of the items on the palette is locked in Assignment mode. To relocate items on the
palette, you must return to Configure Palette mode.
You can navigate between different palette configurations using the tabs [ ] at the top of the
palette screen.
Add a new tab by clicking Add Tab [ ].
Remove the selected tab by selecting Remove [ ].
4.11.2 Configure Canvas mode
To place Production Maestro Pro in Configure Canvas mode, select Configure Canvas from the
operational modes menu to the left of the screen.
The selected mode is highlighted in orange [ ].
Configure Canvas mode is used to locate, organize and size conferences, preset conferences, and
fixed Port Viewers on the canvas. You can also apply meters to conferences and Port Viewers, and
add notes (such as instructions or reminders) to the canvas.
Using the Configure Canvas palette
The Configure Canvas palette is divided into three tabbed sections, Conferences, four-wires, and
Other [ ].
The palette opens on Conferences, which lists all the available conferences [ ] that can
be added to the canvas for configuration.
Four-wires lists all the fixed four-wires [ ] that you can add to the canvas as fixed
Port Viewers.
Tip: If the list of conferences or four-wires is particularly long, you can locate particular conference(s)
using the Name Search facility [ ].
29 Eclipse Production Maestro Pro User Guide