Clear-Com Production-Maestro-Pro - Manual (Page 9)

2 Installing Production Maestro Pro
This chapter describes how to install your Production Maestro Pro software.
Note:
Before installing Production Maestro Pro, check that your Windows PC meets the system
requirements described in 1.2 System requirements.
Tip: To find out more about Production Maestro Pro as you work, see Help [ ] in the top right hand
corner of your Production Maestro Pro screen.
2.1 Before installing
Before installing Production Maestro Pro, check that your Windows PC meets the system
requirements described in 1.2 System requirements.
If you are installing Production Maestro Pro as an update to an existing Production Maestro Pro
installation, you must uninstall your existing version of Production Maestro Pro.
Ensure that you save:
• Your Production Maestro Pro palette and canvas screen layouts (configurations))
(*.ccr files). The current installation opens at the last project you worked on. However, you
will lose your work if you do not save the configuration before updating Production Maestro
Pro.
• The EHX system configuration(s) (*.hxn files) that relate to your Production Maestro Pro
configuration(s). Or an exported .hxpmi file based on your EHX system configuration.
2.2 Installing Production Maestro Pro
To install Production Maestro Pro to your PC:
1. Insert the CD-ROM into the PC. Navigate to the CD-ROM and click the relevant *.exe file for
your machine. Click either:
• PMSetup
To indicate that the Setup wizard has begun loading, the following screen is displayed:
9 Production Maestro Pro User Guide
PN: 399G063 Rev: A 09/05/13