Clear-Com Production-Maestro-Pro - Manual (Page 33)

If you want to make an exclusive assignment from the palette to a conference or Port Viewer, right
click the item in the palette and drag. The Exclusive assignment icon [ ] is displayed.
Exclusively assigned panels, four-wires, idents and monitors are removed from any other conference
to which they have been assigned (but not Port Viewers to which they have been assigned).
Keygroups are removed from both conferences and Port Viewers.
Figure 7: Exclusive assignment icon
Important note:
It is not possible to place a panel as both a fixed source and a destination into a conference.
4.12 Controlling input and output levels
Figure 8: Input and Output levels
The input and output levels are displayed on panels, four-wires, idents and monitors while they are
in the palette. The (output) level of idents [ ] and the (input) level [ ] of monitors is also
displayed when they are assigned to conferences (but not Port Viewers).
To display the parameters for the panel, four-wire, ident or monitor, move the mouse over the item.
33 Eclipse Production Maestro Pro User Guide