Clear-Com Production-Maestro-Pro - Manual (Page 35)

4.13 Preset conferences
Production Maestro Pro enables you to create preset conferences [ ] that you can
copy into live conferences as required.
Assigning preset conferences to existing conferences enables you to manage multiple changes to
conferences in a single assignment operation. For example, by assigning a preset conference to an
existing news conference you might instantly change the communication lines to those from a
different OB truck, or swap the conference to a different studio keygroup (erasing existing four-wire
members).
Note:
Preset conferences are only created within Production Maestro Pro are not sent to the matrix. Only
when they are applied to existing conferences are changes sent to the matrix.
To create a preset conference:
1. Go to Configure Canvas > Other tab in the palette.
2. Drag and drop the preset conference icon [ ] onto the canvas.
Tip: For more information about Configure Canvas mode and the Other tab in the palette, see
4.11.2 Configure Canvas mode.
To give the preset conference a name, using an alias label:
1. Go to Alias.
2. Type the name of the label (up to 10 characters) into the blank label area [ ].
3. Drag the alias label [ ] to the preset conference.
Note:
Creating and assigning an alias label to a preset conference is the same as for normal, EHX
conferences.
Tip: For more information about Alias mode, see 4.11.3 Alias mode.
To assign items (such as four-wires, monitors, idents and keygroups) to a preset conference:
1. Go to Assignment.
2. Drag and drop available items from the palette onto the preset conference (as you would with
any other conference).
35 Eclipse Production Maestro Pro User Guide