Hach-Lange SPECTRO COLOR d-8 - Manual (Page 23)

BDA 387/2
24
C4 Memory
spectro-color
®
can store up to 1000 measurements. The stored values are available for later
printing or loading to a PC (optional QC-software).
At item [Memory] you can activate or deactivate
(on or off) the memory and print or clear the
contents. This item comes at [value memory] in
the main configuration menu. Then you see the
menu shown on the right.
C4.1 Memory activation
Press key × or Ø to select [aktiv].
Press key ok to activate the memory. All following measurements are stored in the
instrument.
With a barcode reader, the reference values can be scanned directly from the barcode.
Attention: Clear memory before first use (see C4.4).
C4.2 Memory deactivation
Press key × or Ø to select [passive]. Press key ok to deactivate the memory.
C4.3 Memory printing
Identical to the example of C4.1, but selecting „print“.
Printing can only be done with a Hach Lange printer. Connect spectro-color ® and printer with
the cable enclosed. When the printer is ready for operation, select „print“. The memory is
printed in the order of measurements. The contents of the memory can be printed repeatedly
until it is cleared.
C4.4 Memory clearance
Identical to the example of C4.1, but selecting „clear“. Clearance is acknowledged with a
beep and the display reading „ready“ (takes some seconds).
Memory
Ч
Ш
active
passive
print
clear
.
ok