Hach-Lange AMTAX inter2 Basic User Manual User Manual
Page 113
English 113
While you make changes in the SIGNALS menu, the normal measuring
operation of the device continues and all output signals are updated.
After 10 minutes without key actuation, the display jumps back to the
normal measurement operation display.
PHOTOME.VERS. (Photometer version)
SW-LOADABLE (EEPROM type - yes, no)
CONTACT (Responsible customer service branch)
BACKLIGHT (Display lighting)
MODBUS (Option) --> Submenu for setting of the BUS-relevant para-
meters
ADDRESS (Adjustable slave address range of this
MODBUS participant
-->1–247)
SPEED (Transfer rate in baud
--> 4800, 9600, 19,200, 38,400, 57,600, 115,200)
NAME (Display of the name that was assigned via the bus to this
participant)
BUS-TEST (Reception test of the MODBUS protocol)
SETTINGS (2 channel operation)
SIGNALS
PROCESS (Current work process)
ACTION (Subprocess)
INDEX (Process step)
STATUS (Function state – ok, error)
T (Temperature inside the housing)
REF (Current reference level)
MES (Current measurement level)
GAIN (Amplification of the reference- and measurement level [each 0–7])
ΔE-ACT (Current extinction)
ΔE-MEAS (Extinction of the last measurement)