Hach-Lange POLYMETRON 9245 Basic User Manual - Manual (Page 6)

Overview
Figure 1 Front and rear panels
1 Sodium ion selective electrode 8 Reagent shelf
2 Reference electrode 9 Frame for panel mounting
3 Sample flow adjustment valve 10 Reagent canister holder
4 User interface 11 Local controller box
5 Overflow vessel 12 Electrolyte reservoir
6 Measuring cell 13 Pump box
7 Door lock 14 Sample inlet valve
Installation
W A R N I N G
The analyzer should only be assembled by qualified staff. Mains power should only be connected once
installation has been completed and checked
Mounting the analyzer
C A U T I O N
Wherever the analyzer is to be mounted, it is important to note that it must be placed in an upright position with
the transmitter at the top. It is recommended to use a spirit level to ensure that the analyzer is correctly positioned
and not leaning to one side or forward. This is essential to guarantee the accuracy of the analyzer.
Panel mounting
Mount the analyzer using the fixation holes located around the outside of the analyzer.
Wall mounting
Use the wall mounting kit to fix the instrument to the wall. The distance between the two pieces is
460 mm.
6 English