3 parameterization on the sc1000, 1 user interfaces and navigation, 2 system setup – Hach-Lange WTOS P-RTC User Manual
Page 18
Advertising
18
Parameterization and operation
4.3
Parameterization on the sc1000
4.3.1
User interfaces and navigation
Before the system is used, the user must be familiar with the sc
controller functions. Learn how to navigate through the menu and
perform the relevant functions.
4.3.2
System setup
1. Open the
MAIN MENU
.
2. Select RTC MODULE / PROGNOSYS and confirm.
3. Select the RTC MODULE menu and confirm.
4. Select the RTC module and confirm.
Advertising