Hach-Lange BUHLER 1027 wall mount automatic water sampler (BL series) - Manual (Page 49)

Operation
Page 49 Manual Bühler 1027
6.3.1
**********************
SAMPLES PER BOTTLE
1
**********************
At SAMPLE-RELATED bottle filling:
Enter the maximum number of samples per bottle. As soon as the
set number of samples has been extracted, sampling into the
respective bottle is terminated.
5.2.5
**********************
BOTTLE VERSION
*SINGLE BOTTLE
2 x 5;0 L
2 x 10,0 L
**********************
If your sampler is equipped with a distributor, select here the
distributor/bottle variant.
5.2.12
**********************
REPEAT PROGRAM ?
YES
*NO
**********************
If the program shall only run once, select NO.
Selecting „YES“ means continuous operation (the program is
always restarted).
Remark: In that case, the program will run endlessly. So,
please make sure that the bottles are emptied
regularly according to the programming as
otherwise they will be overfilled.
1.1.4
**********************
PROGRAMM NO. 3
EVENT
INTERVAL HRS 00:06
BTL CHANGE EVENT
**********************
Each programing is completed with this menu to have the
possibility to check the program settings of the just created
program.
Program No. 3 has now been programmed with an event-related
program.
To start the program, press the „DOWN“ arrow key.
1.1.5
**********************
PROGRAM NO. 3
CHANGE
DELAYED START
*START
**********************
The just created program can either be
• started immediately
• started with a delay or
• changed.