Hach-Lange BIOGAS User Manual - Manual (Page 10)

10
Installation
3.4 Interfaces
Figure 2 Interfaces
3.5 Installation of burettes and reagents
Refer to:
• BIOGAS Titration Manager Installation form, Catalog Number: D26T044
• BIOGAS Titration Manager Reference Manual, Catalog Number: D21T087 ,
Section 5 Glossary, keywords «Installing burette» and «Installing reagent»
1 RS232 socket. Not used.
8 Pt-Pt BNC socket.
Double metal electrodes
2 PC/PRINTER RS232 socket.
PC, cable A95X501
Printer, cables A95P201.
9 TEMP Cinch socket.
Temperature sensors
3 RS232 socket. Not used.
10 Banana socket. Single metal electrodes for
grounding only
4 BALANCE RS232 socket.
Due to the large variety of balance and models,
cables are made on demand, please contact your
local supplier. 11 Red and black banana sockets
TTL 0 ±5 V input.
Red and black banana sockets
TTL 0 ±5 V output.
5 SAC RS232 socket.
Sample changer, cable A95A202 12 Power connection socket.
Line cord A95S001/A95S002
6 E1 BNC socket.
Combined pH or ISE electrodes w/wo
temperature sensor,
Single pH or ISE electrodes,
Single or combined metal electrodes (Redox
measurements)
13 power button: On/Off switch
7 REF BNC socket.
Reference electrodes 14 Socket for propeller stirrer (Catalog Number:
904-480).
I
O
1
2
3
4
5
6
7 8 9 10 11 12
14
13
E1 E1 E2 E2 TEMP TEMP GND GND
5V OUT V OUT
IN IN
T 1A 250V T 1A 250V
TTLTT L
100-240V 100-240Vac ac
50-60Hz 45VA 50-60Hz 45VA
SAC SAC AUX. AUX.
REF REF Pt-Pt Pt-Pt
LINE FUSE T1A L250V LINE FUSE T1A L250V
BALANCE BALANCE
PROPELLER PROPELLER PC/PRINTER PC/PRINTER SLAVE SLAVE
3020116 3020116
Conforms to Conforms to
UL STD 61010A-1
UL STD 61010A-1
Certified to Certified to
CSA STD C22.2 No. 1010.1
CSA STD C22.2 No. 1010.1
MADE IN FRANCE MADE IN FRANCE RADIOMETER ANALYTICAL SAS RADIOMETER ANALYTICAL SAS
716R999N999 716R999N999