Hach-Lange BIOGAS User Manual - Manual (Page 40)

40
Standard Operations
5.10.2.2 Enter the reagent parameters
1. Select Titre = Calibrate
2. Enter the Edit reagent menu and press 1
(Calibration parameters).
The Calibration parameters are general
parameters used during the calibration.
3. Press 2 (Standard).
The Standard parameters concerning the
standard solution used for the calibration.
4. Press 3 (Results).
The Results parameters concerning
stoichiometric coefficients for the chemical
reaction (if required).
5. Press 4 (Printouts).
Enter Printouts parameters defining the
calibration report to be printed.
5.10.3 Enter a new method
1. Enter the Method menu and press 5 (Method
library).
2. Press 1 New method and press the validation
key.
3. Select ID and press the validation key.
4. Enter a method name (up to 16 characters).
5. Press 1 to confirm.
6. Edit the method parameters.