Hach-Lange BIOGAS User Manual - Manual (Page 28)

28
Standard Operations
2. Press 2 to access. These are the parameters
entered in the Edit electrode screen.
3. Press Print to get an overview of the
parameters of the current programmed
electrode.
5.8.4 Automatic printouts
The Print key is inactive during a titration, pH/mV
measurement, electrode or reagent calibration.
The results obtained during a "Run" are printed
automatically (see
5.6.2.3 on page 25 ).
Depending on the option selected for Detailed in the
Edit method/reagent/electrode - Printout screens,
you will obtain different types of printouts.