Hach-Lange BIOGAS User Manual - Manual (Page 20)

20
Standard Operations
3. Adjust stirring by turning the stirring propeller
knob.
Note: You can consult the corresponding table
between the position (1 to 9) and the stirring
speed by selecting the field Speed setting.
5.6 Setup Menu
1. Press Stop for 3 seconds in the Main window to
move to the Setup menu.
2. Enter the Supervisor code to differentiate
between the Routine mode and the Supervisor
mode.
•
In Routine mode, the user is able to select
and run methods.
• In Supervisor mode, the user can create,
edit, select and run methods. A Supervisor
code is also used to protect your parame-
ters from any unwanted changes.
Note: Continue without entering a Supervisor code.
5.6.1 Configuration menu
1. Press 1 to enter the Configuration menu.
Figure 9 Configuration menu
1 Use the UP and DOWN arrow keys to select the
parameter.
2 Horizontal scroll bar. The position of the bar
indicates the first screen in the Configuration
menu. Use the RIGHT arrow key to move to the
next screen
Note: The position of the bar indicates the
last screen in the Configuration menu
1
2