System configuration – Hach-Lange TITRALAB Users Guide User Manual
Page 43
Getting started
43
System configuration
System configuration
System configuration
System configuration
System configuration
Proceed as follows to configurate your workstation
1.
Press Stop for 3 seconds in the Main window to enter the Setup
menu.
2.
Supervisor code:
Entering a Supervisor code enables you to differentiate
between the 2 operator modes: Routine and Supervisor:
In Routine mode, the user is able to select and run methods. In
Supervisor mode, the user can create, edit, select and run
methods. A Supervisor code is also used to protect your
parameters from any unwanted changes.
•
Continue without entering a Supervisor code.
3.
Press 1
to enter the Configuration menu.
The position of the bar indicates the first screen in the
Configuration menu. Use the RIGHT arrow key
to move to the next screen.
Horizontal
scroll bar
Use the UP and
DOWN arrow
keys to select
the parameter.