Programming reagent parameters – Hach-Lange TITRALAB Users Guide User Manual
Page 61
Advertising
Programming guidelines
61
Programming reagent parameters
Programming reagent parameters
Programming reagent parameters
Programming reagent parameters
Programming reagent parameters
1.
If Titre = Calibrated, enter the reagent definition
parameters and go to the last Edit method screen.
2.
Press 1:
To enter Calibration parameters: general parameters
used during the calibration.
3.
Press 2:
To enter Standard parameters concerning the standard
solution used for the calibration.
4.
Press 3:
To enter the Results parameters concerning acceptation
criteria that you can set on the results and stoichiometric
coefficients for the chemical reaction (if required).
5.
Press 4:
To enter Printouts parameters defining the calibration report
to be printed.
Advertising