CTI Products RCD Standard - Remote Comparator Display - Manual (Page 115)

MCN Remote Comparator Display Appendix D
CTI Products, Inc. Modem Configurations
68-10856-210
109
Factory Options 1 Leased Line Modem Dial Up Line Modem
Modem Parameters Modem Parameters Modem Parameters
DTE Parameters (continued)
AT Command Set
-HIB Modem
- PC Modem
Disabled
Disabled Enabled
Enabled
DTR Response Ignore (&D) DTR Resets (&D3)
DSR State Forced High Forced High
DCD State Forced High DCD is Normal (&C1)
CTS State Forced High Forced High
DTE Fallback Disabled Disabled
Options at Disconnect Options Restored at Options Restored at
Test Parameters
Bilateral Analog Disabled Disabled
Bilateral Digital Disabled Disabled
DTE Local Test Disabled Disabled
DTE Remote Test Disabled Disabled
Remote Commanded Enabled Enabled
Test Time-out Off Off
Dial Line Parameters
Tone Dial / Pulse Tone Dial Tone Dial
Auto Dial #1 #1
Wait For Dial Tone / Blind Wait For Dial Tone Wait For Dial Tone
Wait Delay 2 Sec 2 sec
Pause Delay 2 Sec 2 Sec
Call Time-out 30 Sec 30 Sec
Answer on Ring 1 1
801 V.32 Time-out Long Long
Autocallback Disabled Disabled
Speaker Options
Volume Control Medium Medium
On / Off Control Until Carrier Detect Until Carrier Detect
Additional AT Options Additional AT Options
Echo Off (E) **
** Programmable only with a communications program using the modems DCE
port