Modem dialing, Odem, Ialing – CTI Products RCD Standard - Remote Comparator Display User Manual
Page 47
MCN Remote Comparator Display
Running the MCN Comparator Display
CTI Products, Inc.
(MCNRCD) Program
68-10856-210
41
7.2.1 Modem Dialing
If you are using a MCN RCD system with dial-up modems, the MCNRCD
program will go through a dialing sequence to connect to the remote HIB. The
program reads the dialing string from the MCN Screen File (*.MSF), or the
MCNRCD command line, and proceeds to make the connection.
Figure 22 - Call Progress Status
The above example shows the progress of a call before the remote HIB modem
answers. The MCN Initialization Box has a Cancel button which allows you to
terminate the call before the remote HIB modem answers.
When you are running the MCN Remote Comparator Display program in dial-up
mode and you exit, the MCNRCD program will disconnect the current modem
connection. It will display a Modem Disconnect Sequence dialog box to
inform you of the status of the disconnect sequence.