CTI Products RCD Standard - Remote Comparator Display - Manual (Page 39)

MCN Remote Comparator Display Configuring a System
CTI Products, Inc. Using MCNCFG
68-10856-210
33
Figure 18 - Entering a Screen Name
6.5.9 Entering the HIB Telephone Number / Modem Dialing String
If you are using the MCNRCD and HIB with dial-up modems, you must enter a
modem dialing string (the phone number for the HIB location) into the screen file.
To program the dialing string for this screen:
1
While the screen file is loaded press H , e , d or pick the Edit Dialing String
menu command with the mouse. If a screen file is not loaded this command
is inactive.
2 Type the "AT" dialing command for your modem, including PBX access
codes, phone number.