CTI Products RCD Standard - Remote Comparator Display - Manual (Page 70)

MCN Remote Comparator Display Troubleshooting
CTI Products, Inc.
68-10856-210
64
Problem:
I cannot get the HIB and PC to communicate through my leased line
connection.
•
Verify that the baud rate specified on the MCNRCD command line matches
the settings of the HIB’s OPTION A switches 1, 2 and 3. Either change the
command line baud rate setting or change the HIB’s baud rate switches and
reset the HIB.
•
Verify that the HIB’s OPTION A switch 5 is in the UP position. If not in the
UP position, change the switch and reset the HIB.
•
Verify that you specified the /LL command line option for MCNRCD.