CTI Products RCD Standard - Remote Comparator Display - Manual (Page 61)

MCN Remote Comparator Display Running the MCN Comparator Display
CTI Products, Inc. (MCNRCD) Program
68-10856-210
55
An example of a Statistical Log file using the default screen is shown here:
"X1,DEFAULT.MSF ,13:19:23,06-05"
"00,1,01,F2,F4,13:19:23,06-05"
"X9,DEFAULT.MSF ,13:19:26,06-05"
Data accumulated in the MCNSTAT.LOG can be used by a custom written
analytical program to see how your system is performing or how it is being
utilized. CTI does not furnish this type of software.
When the Statistical log file MCNSTAT.LOG is 100% full, a message box will
appear. The operator can continue to run the MCNRCD program with Statistical
logging disabled or back up the MCNSTAT Log file and rename or delete the
older file. See Figure 31 below.
Figure 31 - Statistical Log File Full