Lectrosonics Venue 3.9 - Manual (Page 16)

Venue
USB Driver Installation (Windows 2000) -
First Time
Use the following procedure when LecNet2 ™ device is
connected to the Windows 2000-based PC for the first
time.
1. Connect a USB cable between the Venue Receiv­
er’s USB port and the USB power on the computer
system. Place the LecNet2 ™ Installation Disk in the
PC’s CD-ROM drive and click “ Next>” to display the
next page.
2. Select Search for a suitable driver for my device
(recommended) and click “Next>” to continue.
3. Check only CD-ROM drives then click “Next>” to
search the LecNet2 ™ CD for the USB driver.
4. When the driver is found, the LecNet2 ™ device
name will be displayed along with the location of the
driver. Click “ Next>” to install the driver. (The device
found will actually say “VR” instead of the “DM1624”
that appears in this example.)
5. Click “Finish” when the installation is complete.
USB Driver Installation (Windows 2000) -
Subsequent Installations
Once the LecNet2 ™ USB driver is installed in a Win­
dows ® 2000 system device, and subsequent LectNet2
USB devices will invoke the Found New Hardware
Wizard which will automatically load the LecNet2 ™ USB
driver for the new device.
LECTROSONICS, INC. 16