Lectrosonics Venue 3.9 - Manual (Page 17)

Digital Hybrid Wireless™ Modular Receiver System
Setting Up the VR System Via USB Port
Once the LecNet2 ™ software and USB drivers have
been installed, the Venue System can be configured
with a software interface and a computer using a Win­
dows ® 2000, XP or Vista TM operating system.
The following procedure is designed to assist new users
to access the VRpanel and provide a basic understand
of the layout. More detailed explanations concerning
usage and configuration using VRpanel are contained
in the online Help.
Help also documents the VR General Commands
used by external devices, including those produced by
AMX™ and Crestron™, that can be used to operate
and control the VR system.
Opening VRpanel
1. On the computer desktop, click Start then All Pro­
grams to display the list of programs installed on
the computer. Point to LecNet2 and select VRpanel
for Venue Receiver from the LecNet2 submenu to
load the VRpanel - How To Begin dialog.
2. Select I would like to Add VR detected via USB
and click OK.
3. The Add VR(s) via USB dialog lists the ID & Serial
Number of all Venue Systems connected to the
computer via the USB. Click on the Venue System
to be monitored or configured to display the VR-
panel for that system.
VRpanel Main Window
There are four major elements to the VRpanel Main
Window: Menu Bar, Venue System Information, In­
stalled Receiver Modules and Information Bar. The
following information provides a short description of the
VRpanel. For a more detailed explanation of Venue Sys­
tem set up and operation via the USB port, refer to the
online Help.
Menu Bar
Client Area
Status Bar
Menu Bar
The Menu Bar list the menus used building and editing
configurations, upgrading firmware and accessing Help.
These include the File menu, Configuration menu and
Help menu.
File Menu
File Menu
Configuration Menu
Help Menu
The File menu contains commands for loading and
saving configurations, upgrading firmware and the EXIT
command.
Configuration Menu
The Configuration menu is used to build a configura­
tion by detecting and adding VR systems. It also allows
configurations to be constructed offline via the Add Offline
command. the addition of Venue Systems to the VRpanel.
Rio Rancho, NM 17