Diamond Products CC6566 - Manual (Page 41)

CC6566 - CC6566-3 Concrete Saw Manual
Engine
WARNING
 Let the engine cool down prior to performing maintenance.
Always refer to the engine operator’s manual as the primary source for
information on the engine, including maintenance and servicing!
Engine Cooling System
Inspect and clean the engine cooling system
regularly depending on the level of concrete dust
and debris at work sites. Failure to clean and
monitor the engine cooling system will result in
higher operating temperatures.
Radiator
Figure 66: Radiator
1. Check level of coolant before every
operation. Coolant will last for one day’s
work if filled all the way up before operation
start.
2. Check for any dust and dirt between radiator
fins and tube, wash away with running
water.
3. Refer to your engine manual for radiator
maintenance.
Cooling Fan
Figure 67: Cooling Fan
1. Blow compressed air around the fan to
remove slurry and debris.
2. Ensure fan is clear of debris and able to
rotate freely.
41