Diamond Products CC6566 - Manual (Page 5)

CC6566 - CC6566-3 Concrete Saw Manual
Safety Precautions
Operate the CC6566 Concrete Saw and CC6566-3
Concrete Saw and all of their components
according to this manual. Failure to comply with
and understand the following safety, operations,
and maintenance instructions can result in serious
injuries and/or death. All operators must be
properly trained or supervised prior to using these
saws and should understand the risks and hazards
involved. Improper or unintended saw usage is
discouraged and Diamond Products cannot be held
liable for any resulting damages.
Saw modifications should be made by Diamond
Products to ensure proper safety and accuracy.
Modifications made to these saws by the owner are
not the responsibility of Diamond Products and void
all saw warranties if a problem arises as a result of
the modification.
Refer to the Diamond Products’ Parts Lists for
additional information and part diagrams. Prior to
operating the saw, record the saw’s serial number,
and the engine’s model and serial numbers in the
Serial Tags section in the Index for future
reference.
The information in this manual may be updated
at any time!
Safety Alerts
DANGER
Serious injuries and/or death will occur if these
instructions are not followed.
WARNING
Serious injuries and/or death could occur if
these instructions are not followed.
CAUTION
Mild and/or moderate injuries could occur if
these instructions are not followed.
Proposition 65
WARNING
Engine exhaust and some of its
constituents are known to the
State of California to cause
cancer, birth defects, and/or other
reproductive harm.
Spark Arrester Requirement
WARNING
In the State of California it is a violation of Section
4442 or 4443 to use or operate the engine on any
forest-covered, brush-covered, or grass-covered
land unless the engine is equipped with a spark
arrester, as defined in Section 4442, maintained in
effective, working order or the engine is
constructed, equipped, and maintained for the
prevention of fire pursuant to Section 4443
Respiratory Hazards
WARNING
Concrete cutting produces dusts and fumes
known to cause illness, death, cancer,
respiratory disease, birth defects, and/or other
reproductive harm. Safety protection
techniques include, but are not limited to:
 Wearing
gloves.
 Wearing safety goggles or a face
shield.
 Using approved respirators.
 Washing work clothes daily.
 Using water when wet cutting to
minimize dust.
 Washing the hands and face prior to
eating/drinking.
For additional safety and self-protection
information contact your employer, the
Occupational Safety and Health
Administration (OSHA), and/or The National
Institute for Occupational Safety and Health
(NIOSH).
5