Nova-Tech CBK Series - Manual (Page 12)

© Adam Equipment Company 2007
10
10.0 OPERATIONS
10.1 ZEROING
• You can press the [Zero] key at any time to set the zero point
from which all other weighing and counting is measured. This will
usually be necessary when the platform is empty. When the zero
point is obtained the display will show the zero indicator.
• The scale has an automatic re-zeroing function to account for
minor drifting or accumulation of material on the platform.
However you may need to press
[Zero] to re-zero the scale if
small amount of weight is still shown when the platform is empty.
10.2 TARING
10.2.1 Manual tare
• Zero the scale by pressing [Zero]. The zero indicator will be on.
Place a container on the pan and its weight will be displayed.
• Press [Tare] when the reading is stable. The weight that was
displayed is stored as the tare value and it is subtracted from the
display, leaving zero on the display. The stable and
Net indicator
will be on.
• As a product is added only the weight of the product will be
shown. The scale could be tared a second time if another type of
product was to be added to the first one. Again only the weight
that is added after taring will be displayed.