Nova-Tech CBK Series - Manual (Page 18)

© Adam Equipment Company 2007
16
NOTE:
1. If the recalled limit is for parts counting, the display will show the last
sample value used, ready for a new sample to be counted.
2. If the recalled unit is a percent weighing limit, the display will show the
last sample value used, ready for a new sample to be weighed.
3. If the memory location was empty the scale will return to weighing.
10.7 PERCENT WEIGHING
The scale can be set to perform percent weighing. See Section 13.1.
The scale will use a mass on the platform as the 100% reference weight. If
the platform is empty (or the scale is tared) then the user can input a
reference weight using the keypad.
• Press [Func]. The first option is “FUnC 1”.
• Press the [Tare] key. “F1 PCt” will be displayed.
• Press [Tare] again to enter percent weighing. The scale will set the
sample mass on the platform as 100% reference weight.
NOTE: If there is no reference weight on the pan and percent weighing
function is entered, pressing
[Tare] will return the scale will return to
weighing.
• Remove the sample weight. Then any other weight placed on the scale
will be displayed as a percentage of the original sample. For example,