Nova-Tech CBK Series User Manual
Page 8
© Adam Equipment Company 2007
6
3.2 SETTING UP
• The CBK Series comes with a stainless steel platform packed
separately.
• Place the platform in the locating holes on the top cover.
• Do not press with excessive force as this could damage the load
cell inside.
• Level the scale by adjusting the four feet. The scale should be
adjusted such that the bubble in the spirit level is in the centre of
the level and the scale is supported by all four feet.
• Attach the power cable to the connector on the base on the left of
the scale. Plug in the power cable to the mains. Switch on the
power switch located on the base on the right side of the scale.
• The scale will first display the software revision then run a self-
test. At the end of the self-test it will display zero weight when a
stable condition has been achieved. A stable symbol and zero
symbol indicators are also displayed.