Nova-Tech CBK Series - Manual (Page 29)

© Adam Equipment Company 2007
27
Scale will perform the following, depending on the Accumulation and Print
Settings:
A CCUMULATION
SETTINGS
PRINT SETTINGS
AC on AC Off
AUto
Accumulate and print
automatically Print automatically,
Do not accumulate
mAn Accumulate and Print only
when
[Print] key pressed
Print when [Print] key is pressed,
Do not accumulate.
Cont
Print continuously.
Accumulate when
[Print] key is pressed Print continuously.
Do not accumulate.
13.3 SCALE PARAMETERS
• Shortcut to enter this group is to press and hold the [Count] Key for 4
seconds. The display will go directly to “S1 Un ”.
• Press [Func] to view the list of parameters.
• Press [Tare] to enter a parameter. Press [Func] to view the options for
the parameter settings.
• Press [Tare] to confirm the change and then advance to the next
parameter by pressing the [Func] key.
• Press [Zero] to return to the group “FUnC 3”. If you press [Zero] again,
the scale will exit the User Parameter section and return to normal
weighing.
This group of parameters are used to control the operation of the scale.
Parameter Description Options Default
setting
S1 Un Enable or disable weighing
units, will not allow to
disable all units, at least one
has to be enabled.
kg
g
lb
oz
lb:oz kg