Nova-Tech CBK Series - Manual (Page 9)

© Adam Equipment Company 2007
7
4.0 KEYPAD
KEYS
PRIMARY FUNCTION SECONDARY FUNCTION
[Zero] Sets the zero point for all subsequent
weighing. The display shows zero. Escape from any setting menus
[Tare] It tares the scale and stores the current
weight in memory as a tare value,
subtracts the tare value from the weight
and shows the results. This is the net
weight. Accept the set values
[Unit] This is used to select the weighing units
from a preset list of available units.
Allows the weight, unit weight,
and count to be seen when
parts counting or to change from
weight to % in percent weighing
[Low
Limit]
&
[High
Limit] It sets the limits for check weighing and
allows setting of either the low limit or
the high limit or both.
None
[ Lim] It stores and recalls any of 10 preset
limits None
[Func] This is used to select percent weighing,
RS-232 parameters, Operation of the
bar graph, RTC settings, User ID and
Scale ID. None
[Count] Enter Parts Counting None
[Print] It is used to print the results to a PC or
printer using the RS-232 interface. It
also adds the value to the accumulation
memory if the accumulation function is
not automatic. None
[1] to [0]
and
[CE]
Allow entering numerical values where
required, setting of limits, time and date
for example.