Pach and Company AeGIS 8000 Series Manual - Manual (Page 5)

Chapter 1
GETTING STARTED
1.1 INTRODUCTION
Pach & Company thanks and congratulates you on the purchase of your AeGIS 8000 Series Telephone Access Control
Systems. The AeGIS 8000 Series are a dedicated Telephone Entry Access Control System, available in surface and
full-flush mount. A mounting ring is required for full-flush mount.
The manual is designed to guide you through the proper programming and use of the AeGIS 8000 Series. It is important for
you to read and follow the manual completely. THE INSTALLATION AND PROGRAMMING MANUAL AND SOFTWARE
PROGRAMMING MANUAL ARE ALSO AVAILABLE IN THE CD ROM
.
The Aegis 8000 Series comes with two years warranty, see section 1.4 for detail.
1.2 SYSTEM DESCRIPTION, SPECIFICATIONS AND ACCESSORIES
AeGIS 8000 Series utilizes microprocessor technology to provide security as well as convenience to you. It is designed for
residential and commercial buildings, military and government sites, industrial facilities, or any location where access
control is required. It is a dedicated telephone entry system and connects to the public telephone network. Authorization for
access control is through the telephone line, or with the tenant's own access code, which is entered on the system
keypad.
The system parameters and tenants data will be entered via the keypad and the LCD provides easy display. EEPROM
technology is used on AeGIS 8000 series. The tenant database will not be lost during a power failure.
Standard features:
• Program and store the tenant's name, directory code, telephone number and 4-digit personal access code.
• Remote programming via modem (modem and software are included).
• Unlocking door or gate remotely by the tenant using his or her telephone keypad.
• Unlocking door or gate by the tenant using his or her own private access code.
• Built-in back-light LCD directory, Postal Switch and Two Independent Relay.
• Recess keypad with built-in night lights.
• Programmable features:
• 2, 3 or 4 Digit Directory Code
• Lock Out Count
• Manual Unlock-Auto Countdown Re-lock.
• 4 Digit Unit master Code
• Open Interval
• Talk Time
Technical Specifications:
Power Input: 12 VAC 40 VA (supplied) or 12 VDC 40VA UL Listed Transformer
Current Consumption: 1.0 A idle, 1.5 A operation.
Emergency Battery: 12Vdc, 4Ahr rechargeable (not supplied)
Telephone Line: Standard voice grade RJ11 jack.
Night Light: 14V 0.080A 15,000 Average life hours or Light Emitting Diode (LED).
Operating Environment: Temp. 32°F to +140°F Relative Humidity 0% to 95% non-condensing.
* Heater Pad (AHP5) is required if the ambient temperature is below 32°F.
Pach and Company Chapter 1 Page 1
AeGIS 8000 Series GETTING STARTED