Not available – Pach and Company AeGIS 7000 Series Manual User Manual
Page 19
05
MANUAL LOCK
(OPEN) OR
UNLOCK (CLOSE)
DOOR
06
SELECTING
DIRECTORY DIGITS
Factory default setting is
3-digit.
• Press
*
to cancel deletion and you hear “One
Long Beep” and proceed to step 5.
Step 4
Press 5 then # to delete or
Press
*
to cancel deletion.
Step 5
Proceed to step 2 and select the same Function
Code or different Function Code to continue
programming or press * to exit the programming
mode and you will hear “Three Short Beeps”.
Step 1
Log on to programming mode (see section 3.1),
the display shows:
Step 2
Enter Function Code 05 then press #, the
display shows:
Step 3
Enter
• 01-98 hours to unlock door or
• 99 hours to to unlock door for
indefinite time or
• 00 hours to lock door
then press # or press
*
to cancel.
Step 5
Proceed to step 2 and select the same Function
Code or different Function Code to continue
programming or press
*
to exit the programming
mode and you will hear “Three Short Beeps”.
Step 1
Log on to programming mode (see section 3.1),
the display shows:
Step 2
Enter Function Code 06 then press #, the
display shows:
Step 3
Enter the Directory Digits 2, 3 or 4 then press #
or press
*
to keep the existing one.
Step 4
Proceed to step 2 and select the same Function
Code or different Function Code to continue
programming or press
*
to exit the programming
mode and you will hear “Three Short Beeps”.
Step 1
Log on to programming mode,
see section 3.2 If you have
logged on proceed to step 2.
Step 2
Enter Function Code 05 then
press #, you hear “One Short
Beep”.
Step 3
Enter
• 01-98 hours to unlock
door or
• 99 hours to to unlock
door for indefinite time
or
• 00 hours to lock door
then press # you will hear “Two
Long Beeps” and “Two Short
Beeps”.
Step 4
Select another Function Code to
program another parameter or
tenant's directory, otherwise enter
91 then press # to disconnect the
call, you hear “Three Short
Beeps”.
NOT AVAILABLE.
FUNCTION CODE
LOCAL PROGRAMMING
TOUCH TONE PROGRAMMING
Pach and Company
Chapter 3
Page 12
AeGIS 7000 Series
PROGRAMMING
Select Func: _ _
OPEN: 00 HOURS
Select Func: _ _
DIR DIGITS: 3 _