Bosch THD2023 Heißwasserspender Filtrino FastCup - Manual (Page 25)

25
THD20.. 07/2011
en
Problem Possible cause Remedy
Water is collecting in the
water outlet.
Condensation water may
result due to physical
properties.
It is normal for condensation
to appear, simply wipe it
away.
The O symbol is lighting
even though there is a
suficient amount of water in
the water tank.
The loat in the water tank
is stuck.
Clean the water tank and
release the loat.
N lights up even though a
ilter has been used.
Even iltered water contains
low amounts of calcium
carbonate.
Descale the appliance as
described in the chapter
“Descaling”.
The appliance is making
loud “cooking noises” when
drawing water.
The ilter is set to “yes” (see
chapter “BRITA MAXTRA
water ilter system”) but
there is no ilter in place.
Build-up of limescale in the
appliance.
Descale the appliance as
described in the chapter
“Descaling”.
Finally, programme the
correct setting.
The used water is particu-
larly calciferous. Build-up of
limescale in the appliance.
The appliance must be
descaled more often than
the N symbol lights up.
Follow the instructions
outlined in the chapter
“Descaling”.
N, M and O are all lashing
at the same time, it is not
possible to draw any water.
The appliance has a fault. Disconnect the appliance
from the power supply and
contact Customer Service.
If you are unable to rectify the problem, please contact Customer Service.
Filtrino_H1_all_languages.indd 25 01.08.2011 10:52:09