Alliance Laundry Systems PHM1401C - Manual (Page 18)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 16 F8138801
UniLinc Identification
Operational Keypad
The control includes seven keypads. These functions
are available to the operator and are intended to
control and manage operation of the washer-extractor.
Refer to Figure 5 and Table 1.
PHM1401C
Figure 5
Keypad Description
LCD/UP ARROW
Press to move the cursor on display to edit programming values. Also, press
while in Cycle Menu or Run Menu to change to the
Contrast Adjust/Backlight
Menu. Also, press with and to enter System Menu.
UNLOCK/DOWN ARROW
Press to move the cursor on display, edit programming values, or unlock door.
The door can only be unlocked while the machine is idle.
LEFT ARROW Press to move cursor on display.
BACK
Press to move back to the previous display menu. Also, press with and
to enter System Menu. Also, back from the Cycle Menu to enter the
Service Schedule Menu.
RIGHT ARROW
Press to move cursor on display. Press while running a cycle to get to Run
Diagnostic Menu. Press and hold with to enter Delayed Start Menu.
STOP/ON/OFF
Press to stop and abort a machine cycle during Run Mode. Also press with
and to enter System Menu. Press with to enter Delayed Start
Menu.
START/ENTER
Press to start or rapid advance a machine cycle during Run Mode. Also, press to
save edited programming values when used in programming menus.
Table 1