Alliance Laundry Systems PHM1401C - Manual (Page 40)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Program Menu
F8138801 38
Extract Step Menu
The Extract Step Menu is used to program the motor
speed and time for the Extract Step. The Extract Step
can be turned on or off by using the keypad. If
turned off, the control will advance to End of Segment
Audio Signal step. To choose a motor speed,
press while selecting Speed and use the
and keypads to make a selection. The motor
speed is selected from the menu bar. The Extract time
can be programmed by moving highlighted box to
Time. Press . Blinking underline will indicate
number to change. Use the and keypads to
change numbers.
Press the keypad to jump to the Save Changes
Menu.
End of Segment Audio Signal Step Menu
The End of Segment (EOS) Audio Signal Step Menu
allows the user to set whether an audio signal is
activated at the end of a segment. The End of Segment
Audio Signal step can be turned on or off with
the keypad. If turned off, the control will
advance to the next cycle step (start of the next
segment, or the end of the cycle).
Press the keypad to enter the Save Changes
Menu.
PHM1033R
Figure 36
Modify Cycle
Cycle01: Towels White Bleach
Segment01: Prewash
Extract:
Speed
m m : s s
Time
Very Low
Low
Medium
High
Very High
PHM1034R
Figure 37
PHM1035R
Figure 38
Modify Cycle
PHM1034R
Cycle01: Towels White Bleach
Segment01: Prewash
EOS Audio Signal:
Off
Modify Cycle
PHM1035R
Cycle01: Towels White Bleach
Segment01: Prewash
EOS Audio Signal:
On