Alliance Laundry Systems PHM1401C - Manual (Page 63)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Laundry Management
61 F8138801
Total Number of Machine Cycle
Counters
Whenever a machine cycle is completed normally
without the user Rapid Advancing and not being
aborted due to machine errors, the control counts and
records the Total Number of Machine Cycles audit
counter. If the cycle was Rapid Advanced or was
aborted, the control will not increment the Total
Number of Machine Cycles audit counter but will
increment the Total Number of Rapid Advance Cycles
audit counter. If the cycle was aborted due to a
machine error, the control will not increment the Total
Number of Machine Cycles audit counter but will
increment the Total Number of Cycles Aborted audit
counter.
Total Number of Operating Minutes
Counters
Whenever a machine cycle is operating, the control
counts and records the Total Number of Operation
Minutes audit counter (not re-settable and displayed in
hours) and the Total Number of Operating Minutes
Since Bearings Last Serviced auto counter.
Last 10 Machine Cycles Rapid
Advanced or Stopped
Whenever a machine cycle is ended, either by the user
Rapid Advancing, aborting a cycle or because of a
power failure, the control stores the information about
that cycle in the next available location, storing the last
10 machine cycles ended in this way. The information
stored includes: Cycle number, start month, start date,
start hour, start minute, end month, end date, end hour,
end minute and how the cycle ended (rapid advance,
stop, power failure, or opened door machine error).