Fulton Vantage (VTG) Fully Condensing Hydronic Boiler - Manual (Page 14)

© The Fulton Companies 2013
INSTALLATION
VTG-IOM-2013-0815
SECTION 2
2-8
FIGURE 2 - SAFETY VALVE LOCATION
B
C
D
E
FIGURE 3 - SAMPLE PIPING LAYOUT
Note: Sample piping layout (P&ID) is a general representation of system installation. Good practice should be used in system design,
including but not limited to adequate pipe/valve sizing and natural fl ow path for system water.
Note: Valve is shipped loose and must be installed by the contractor.