E-Mon Energy Software - Manual (Page 200)

Glossary
E-Mon Energy User Manual A-3 E-MON
D A Y L I G H T S A V I N G S
Automatic time change (season) used to adjust the “Built-in Clock.” Some recorders can be
programmed to automatically adjust its time by an hour in the falls and spring.
D E M A N D C H A R G E
A charge for demand usage.
D E M A N D P R O F I L E
Energy usage in different times of day, also known as interval data. This data is commonly
used to plot graphs or generate bills (usage and demand).
D E M A N D S T A T I S T I C S
A Statistic table, which displays the Total KWh, Avg. KW, Peak, and Peak Time.
D E V I C E E X P L O R E
An E-Mon Energy™ main window component that displays the group and site location
down to the devices (recorders and meters).
E
E N E R G Y U S E
Energy consumption. E.g. electricity is usually measured in kWh (kilo watt-hour).
E - M O N T E C H N I C A L S U P P O R T
E-Mon Energy support group, 1-800-334-3666.
E X P O R T D A T A
An E-Mon Energy capability to export data as a Comma Separated File (CSV file
extensions) into other applications.
E T H E R N E T
One of E-Mon Energy’s communication options is a Local Area Network connection with
two or more devices on a communication backbone utilizing 10BaseT or 100BaseT line.
F
F L A G S
Flags indicate a power failure or error with the hardware. Error Flags are usually shown in
Red .
F R E Q U E N C Y
Rate of variation of voltage and current, typically 60.0 Hertz (i.e. cycles per second).
F I R M W A R E
A program (ROM, EPROM, or Flash) within the hardware device used to store software
instructions for the metering device.
G
G R A P H
A visual and interactive image that displays a chart based on x by y data values. In E-Mon
Energy, the x-axis values are usually represented in date/time.