E-Mon Energy Software - Manual (Page 87)

Recorder
E-Mon Energy User Manual 8-10 E-MON
How do I Verify the Recorder?
When a connection is established to a location using the Access Location window, E-Mon Energy™ communicates
directly with the recorder to check the status and daily functionality of the device(s). To verify the recorder, the user
can select the Verify Hardware function to check whether the profile mode, sampling rate, the demand interval, and
demand window are functioning properly. If a problem occurs with the recorder, a warning will display in this
window. The illustration below shows that the recorder is functioning properly.
Figure 8.13 - Verifying the Recorder Profile
Recorder Procedures
Setting a Location
To Set the Location:
1 From the E-Mon Energy Explorer Window, click and select Hardware\Set Location from
the drop-down menu. The Select Location dialog opens.
Figure 8.14 - Select Location Dialog
Figure 8.15 - Access Window
2 Click on the Connect button to establish a connection and access the Function and
Hardware to Access
Groups.
Group and Location
in status bar
Connect
button
Set
button