E-Mon Energy Software User Manual
Page 74
Group and Location
E-Mon Energy User Manual
7-17
E-MON
Figure 7.15 - Access Window
5
Click on the C
ONNECT
button to establish connection and access the Function and
Hardware to Access
Groups.
Scanning for Meters (Devices)
To scan for Meters (Devices):
6
From the Function group box, click on Setup Hardware.
7
From the Hardware to Access group box, click on All possible.
Figure 7.16 - Scan Recorder and Status Window
8
Click on the S
CAN
R
ECORDER
button. By default, E-Mon Energy™ will start scanning for
any new devices starting with IDs of 1A, 1B, … Once the new devices are detected, the grid
will display the Recorder ID and the Meter Channel Status (OK, New, Bad….)
9
Once E-Mon Energy scans and moves past the last installed device ID, wait a few seconds
and click C
ANCEL
. At this point, it will allow you to update the database.
Group and Location in
Function Buttons
Connect button