E-Mon Energy Software - Manual (Page 82)

Recorder
E-Mon Energy User Manual 8-5 E-MON
Can I Set a Password for Recorder?
Yes, normally the recorder does not have the password security enabled, but you can set up a password. To set up
password, you will need to select the Others tab on the Database window, and then select the Security icon. Refer to
the Section on Other Features for details.
Note: This feature may not be accessible to everyone. The E-Mon Energy™ user must have
administrator rights to configure these security parameters. Keep your password in a secure
place.
Once the Password Definition is created, the password can be utilized in the Group, Location, or Recorder tab.
Sending the security setup to the recorder is performed when you’re connected to the recorder via the Set Password
in the Access Database function.
Figure 8.3 - Recorder Security Password
How do the Recorders use the AMR schedule?
Some models of the recorder are capable of running automatic scheduler for calling-in (call-home). You would use
E-Mon Energy to set up the schedule, task, and server via the AMR tab. Once configured, E-Mon Energy can send
the setup to the recorder. E-Mon Energy will send the schedule and call-in number (phone/IP Address). For
information on setting up an AMR schedule, see the section on Automatic Meter Reading.