E-Mon Energy Software - Manual (Page 83)

Recorder
E-Mon Energy User Manual 8-6 E-MON
Where do I Set Location and Scan Recorders?
There are two ways of accessing the Set Location feature: first by drilling down to the location level in the E-Mon
Energy™ Device Explorer window and right-clicking on select “Set Location,” or selecting Set Location from the
Hardware
menu.
Figure 8.4 - Explorer Window Figure 8.5 - Hardware Drop-Down Menu
The Select Location dialog opens to display the Group and Location. The Select Location dialog allows you to select
the Group Number/Name and Location Number/Name from the drop-down list. Clicking the Set button will open the
Access
window to a Ready and Standby state. Clicking the Connect button will open the Access window to an On-
Line
state. Note: If the location is via modem, allow time for E-Mon Energy to establish the connection. To learn
more about how to select a Group and Location refer to the Setting Location procedure within this section.
Figure 8.6 - Select Location Dialog
Figure 8.7 - Access Group Window