E-Mon Energy Software - Manual (Page 52)

Automatic Meter Reading (AMR) System
E-Mon Energy User Manual 6-5 E-MON
Recorder Time
Checked
= Will automatically check the date and/or time for the
recorder.
Not Checked
= Will not check the date/time for the recorder.
Initialize Recorder
= If recorder configurations are corrupted
(RAM corruption or real-time clock is bad), E-Mon Energy™ will
initialize the recorder.
Synchronize with PC time
= Will synchronize the recorder
date/time with the PC date/time depending on which selection has
been made at the recorder. Options include Adjustment Limit,
where minimums and maximums are set; as well as Force, where the
recorder always synchronizes at a particular time period.
Profile Status
Checked
= Will check the profile status.
Not Checked
= Will not check the profile status.
Read Meters
Checked
= Will read meter displays (usage accumulation and peak
demand).
Not Checked
= Will not read meter displays.
Verify AMR Schedule (Call-in)
Checked Box
= Will verify the programmed AMR Schedule.
Not-Checked Box
= Will not verify the programmed AMR
Schedule. Note: The AMR Schedule and Server are created on the
AMR tab in the Database Access window.
Set Schedule =
Will set the AMR Schedule (Dial-in), if the
programmed AMR Schedule is different from the database.
Set Server
= Will set the dial-in number into the recorder.
Set Remote Init String
= Will set the init string into the recorder
(e.g., modem init string).
Verify Meter Setup
Checked
= Will verify settings programmed into the meter with
settings stored in the database.
Not Checked
= Will not verify settings.
Send Meter Setup
= If the meter setup is not the same as the
database setup, E-Mon Energy will send the setup to the meter.
Verify Recorder Setup
Checked
= Will verify settings programmed into the recorder with
settings stored in the database.
Not Checked
= Will not verify settings.
Send Recorder Setup
= If the recorder setup is not the same as the
database setup, E-Mon Energy will send the setup to the recorder.
Send Recorder ID&SN
= If the recorder ID and Serial Number is
not the same as the database setup, E-Mon Energy will send the
setup to the recorder.
Groups/Location Using this
Schedule Panel Group.
This list box displays the groups and locations
utilizing the current schedule, task, and server. Note: Prior to
deleting a task, ensure that there is no location utilizing it. (Make
sure this list is emptied).
* = Required field.