FEC AFC1500 User Manual
Page 29
Input/Output Signals
Common (0 VDC)
34
Common (+24 VDC)
34
Common (0 VDC)
33
Common (+24 VDC)
33
Always ON / Always OFF
32
Data Select 2
32
Always ON / Always OFF
31
Data Select 1
31
Always ON / Always OFF
30
Data Select 0
30
As configured
29
Not Used
29
As configured
28
Not Used
28
As configured
27
Not Used
27
As configured
26
Bypass Spindle # 10
26
As configured
25
Bypass Spindle # 9
25
As configured
24
Bypass Spindle # 8
24
As configured
23
Bypass Spindle # 7
23
As configured
22
Bypass Spindle # 6
22
As configured
21
Bypass Spindle # 5
21
Current Limit Warning
20
Bypass Spindle # 4
20
Spindle in Bypass (Any spindle)
19
Bypass Spindle # 3
19
Out Port 8
18
Bypass Spindle # 2
18
Out Port 7
17
Bypass Spindle # 1
17
Out Port 6
16
In Port 3
16
Out Port 5
15
In Port 2
15
Out Port 4
14
In Port 1
14
Out Port 3
13
In Port 0
13
Out Port 2
12
Not used
12
Out Port 1
11
Not used
11
Sequence 3
10
Cycle Count Clear
10
Sequence 2
9
Cycle Count Up
9
Sequence 1
8
Sequence Select 3
8
Sequence 0
7
Sequence Select 2
7
End
6
Sequence Select 1
6
Busy
5
Sequence Select 0
5
Ready
4
Start
4
Abnormal
3
Reverse
3
Accept
2
Reset
2
Reject
1
Stop
1
Signal
2
Pin No.
Signal
Pin No.
Output (Connector PLC2)
Input (Connector PLC1)
Input Signals (Connector PLC1)
The Input Signals are provided on connector PLC1. Inputs are assigned in the
order to the above table. Pins designated as “Not Used” have no input
assigned to them.
NOTE: When using Discrete I/O, “Bypass Spindle” input signals assigned to
the PLC1 connector only can be used up to 10 individual spindles (From the
Multi Unit). When using Discrete I/O and you desire to connect this signal
from additional spindles, the signal must be wired from the individual SAN
Servo controllers using the SAN PLC connector. An alternative to this is to
use a Fieldbus interface which has control of all spindle bypass signals from
the interface.
Chapter 3:
Control Interfaces
29
2
This port is configurable by the User Console and the Data Select Input signals. See Chapter 4 for
further reference