Fairbanks FB3000 Highway System Application - Manual (Page 13)

Section 2: Service Policy Information
7/08 13 51188 Rev. 1
2.2. OVERVIEW
2.2.1. Installation Notes
• After installation, check all devices for proper operation. If any error messages
occur, refer to Troubleshooting or the proper manual of that device.
2.2.2. Electronic Component Care
• Much of the equipment consists of printed circuit
assemblies, which must be installed using
ESD
handling procedures .
• Replacement of individual components is not allowed.
• All components must be returned intact for replacement
credit per normal procedures.
• All electronic and mechanical adjustments are
considered to be part of the installation, and are
included in the installation charge(s).
• Included is any required computer programming or upgrades.
• Included are any accuracy and/or operational specification changes.
• The AC receptacle/outlet shall be located near the Indicator and easily accessible.
• Electrical connections other than those specified may not be performed.