Fairbanks FB3000 Highway System Application - Manual (Page 59)

Section 3: Highway System Mode of Operation
7/08 59 51188 Rev. 1
Definition
3.5.28. Backup / Restore / Default
Backup System Settings – Current parameter settings are saved into the C:\Kernel\ BACKUPS
Folder.
Backup System Setting to Flash Memory – Saves the current configuration settings to a Flash
Memory folder. This can be an internal flash memory card or an external USB removable flash drive.
Restore System Settings – Retrieves and restores any previous configurations files.
─ WARNING! Completing this overwrites any existing files.
Load Default System Settings – Loads the system with the factory default settings.
W A R N I N G !
This changes the system settings to either the original factory default values
or to the System Setting File chosen.
File is saved as “YYYYMMDD.BAK” .