Fairbanks FB3000 Highway System Application User Manual
Page 27
Section 3: Highway System Mode of Operation
7/08
27
51188 Rev. 1
Definition
Window
3.5.5. DOT Scale Summing
When enabled, combines the weight from the
first scale to the last scale for display and print.
Typically this is Scales 2 and 3 of a 4-platform
scale. It is referred to as the
Center Total
.
Legal Limit errors for scales included in this sum
cause this sum to show in error.
1. Select
YES
to
Enable
, and
NO
to
Disable
.
2. Select which two (2) platforms.
3.5.6. Blind Counter
The
Blind Counter
monitors all activity on the
scale, and triggers an event whenever the
weight exceeds the Initial Weight Threshold.
• The
Blind Counter
records all activity that
doesn’t result in a print, as long as the
Initial Weight Threshold
is met and stable
for ten (10) seconds.
• While in the All Scale Activity mode,
output is directed to
File Output, COM
Port Output, or both
.
─
If the unit uses cameras, an image can
be captured, depending on the
configuration.
─
The system supports up to two (2)
cameras.
─
Images are displayed, printed on
tickets, and stored with complete
transactions.